全國谘詢熱線:13926264803

2019710星期三 165102

專心研究,精心製作,謀求高品質發展
Focus on researching,Elaborately making, seeking high quality development.
專心研究,精心製作
謀求高品質發展

印花設備專用油加熱器

向你推薦
  • 寶貝詳情
  • 印花設備專用油加熱器

     

    >>機型特點   Main feature
        ●   
    最高使用溫度300℃  Highest temperature reaching 300

           按鍵式操作麵板,操作簡單 The panel control adopted micro, easy operation

           采用連軸式熱媒油泵浦,泵浦流量大,使用壽命長 usehot oil pump of axis-connection type with big flow rate and long service life

                  可指定選用德國KSB、德國SPECK、德國ALLWEILER熱媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
        
       采用TAT法蘭式球閥及法蘭式過濾 器  TAT flanged ball valves and flange type filter

           “OMRON”、“SCHNEIDER”控製零件 Controlling parts of OMRON, FUJI brand

           自動排氣和帶手動模具回油功能 Full automatic exhaust function and manual mode die oil return function

           出油溫度顯示 temp. indication of oil output and return

           多段加熱控製,功率可自行調整 multi-zone heating control with power self-adjusting function

           電氣配電箱采用雙重隔離及散熱設計 Double-insulation/heating dissipation design for the electric distributioin cabinet
           減少廢品率、減少加熱時間、增加模具/模板壽命  Increase the service life of mold/ templet and reduce the waste rate and the heating time

           特殊管路係統設計,傳熱油不氧化,壽命長Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.  

           采用高溫保溫材料隔熱處理,節約能源及熱量損失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.

           故障指示,維修不用專業人員Fault indication function which allows maintenance without professional maintainers.


    >>安全保護係統 Safety system
      ●   
    總電源過電流無熔絲斷路器 Circuit breaker     ●   異常警告指示燈係統 Alarm system
        
       馬達反轉保護及指示燈 motor rollback protective lamp     ●   異常警告蜂鳴器 Alarm sounding
        
       缺油保護及指示燈Oil lack protective lamp                     ●   保溫隔熱處理 Insulation heating system
           過熱保護及指示燈 over-heat protective    ●   回油溫度顯示表Oil reture display
           循環泵浦過載保護及指示燈Circuiting pump overload protective lamp                            

       電源欠相保護 Power protection
           By-Pass油壓回路 By-pass hydrauic circuit
    ;

    >>產品參數Specification

    機 型Model

    單位Unit

    OTP-30-36

    OTP-40-36

    OTP-50-36

    溫控範圍

    Control range

    60-300℃



    溫控精度

    Control mode

    ±1



    電源power


    3φ 380V 50HZ 或其它(or other)



    傳熱媒體Heat transfer medium


    傳熱油heat tranfer oil



    冷卻方式Cooling method


    間接冷卻indirect cooling



    控製方式Control mode


    按鍵式操作麵板 touching-tone   operation panel



    加熱能量Heating capacity

    KW

    36

    36

    36

    泵浦功率pump rate

    KW

    1.5

    2.2

    3.75

    最大泵浦流量max. pump flow

    L/MIN

    130

    165

    208

    最大泵浦壓力max. pump pressure

    KG/CM²

    2.2

    2.5

    3.2

    最大電力消耗max.power consumption

    KW/H

    37.55

    38.2

    29.2

    冷卻水配管

    Cooling pipe

    INCH

    1/2

    1/2

    1/2

    循環油配管Circulation oil pipe

    INCH

    1

    1-1/4

    1-1/2


    印花設備專用油加熱器

     

    >>機型特點   Main feature
        ●   
    最高使用溫度300℃  Highest temperature reaching 300

           按鍵式操作麵板,操作簡單 The panel control adopted micro, easy operation

           采用連軸式熱媒油泵浦,泵浦流量大,使用壽命長 usehot oil pump of axis-connection type with big flow rate and long service life

                  可指定選用德國KSB、德國SPECK、德國ALLWEILER熱媒油泵浦    KSB, SPECK, ALLWEILER hot oil pump from Germen is available
        
       采用TAT法蘭式球閥及法蘭式過濾 器  TAT flanged ball valves and flange type filter

           “OMRON”、“SCHNEIDER”控製零件 Controlling parts of OMRON, FUJI brand

           自動排氣和帶手動模具回油功能 Full automatic exhaust function and manual mode die oil return function

           出油溫度顯示 temp. indication of oil output and return

           多段加熱控製,功率可自行調整 multi-zone heating control with power self-adjusting function

           電氣配電箱采用雙重隔離及散熱設計 Double-insulation/heating dissipation design for the electric distributioin cabinet
           減少廢品率、減少加熱時間、增加模具/模板壽命  Increase the service life of mold/ templet and reduce the waste rate and the heating time

           特殊管路係統設計,傳熱油不氧化,壽命長Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.  

           采用高溫保溫材料隔熱處理,節約能源及熱量損失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.

           故障指示,維修不用專業人員Fault indication function which allows maintenance without professional maintainers.


    >>安全保護係統 Safety system
      ●   
    總電源過電流無熔絲斷路器 Circuit breaker     ●   異常警告指示燈係統 Alarm system
        
       馬達反轉保護及指示燈 motor rollback protective lamp     ●   異常警告蜂鳴器 Alarm sounding
        
       缺油保護及指示燈Oil lack protective lamp                     ●   保溫隔熱處理 Insulation heating system
           過熱保護及指示燈 over-heat protective    ●   回油溫度顯示表Oil reture display
           循環泵浦過載保護及指示燈Circuiting pump overload protective lamp                            

       電源欠相保護 Power protection
           By-Pass油壓回路 By-pass hydrauic circuit
    ;

    >>產品參數Specification

    機 型Model

    單位Unit

    OTP-30-36

    OTP-40-36

    OTP-50-36

    溫控範圍

    Control range

    60-300℃



    溫控精度

    Control mode

    ±1



    電源power


    3φ 380V 50HZ 或其它(or other)



    傳熱媒體Heat transfer medium


    傳熱油heat tranfer oil



    冷卻方式Cooling method


    間接冷卻indirect cooling



    控製方式Control mode


    按鍵式操作麵板 touching-tone   operation panel



    加熱能量Heating capacity

    KW

    36

    36

    36

    泵浦功率pump rate

    KW

    1.5

    2.2

    3.75

    最大泵浦流量max. pump flow

    L/MIN

    130

    165

    208

    最大泵浦壓力max. pump pressure

    KG/CM²

    2.2

    2.5

    3.2

    最大電力消耗max.power consumption

    KW/H

    37.55

    38.2

    29.2

    冷卻水配管

    Cooling pipe

    INCH

    1/2

    1/2

    1/2

    循環油配管Circulation oil pipe

    INCH

    1

    1-1/4

    1-1/2